The WorkCentre 390 printer is a small version of a WorkCentre Pro. It comes in handy in homes where most people do not want a big, clunky machine sitting in some corner. It is just as handy and can be used in any office as well as home.
The WorkCentre 390 is a laser printer from Xerox. It was designed to replace its brother printer the WorkCentre 385. Besides a printer, it, also, includes a color scanner, fax machine, and copier function. The printer is capable of printing ten pages per minute at 600×600 dpi. It holds up to 150 pieces of paper in the paper tray. The color scanner is capable of 300×300 dpi. The copier can copy up to ten pages per minute, also, and up to 4800 dpi.
With a six second function, the scanner and fax machine on the WorkCentre 390 do a good job, too. The time it takes for the information to transfer from PC to printer may vary, though. The fax has a speed dial function capable of holding up to 80 numbers. The WorkCentre 390, also, has a two megabyte memory and can use a USB interface. The printer can be used when needing to print on different types of documents such as card stocks, envelopes, and labels. The printer is capable of reducing or enlarging a document.
The printer, also, comes with three different trays. These are a document input tray, a printer exit tray, and a document exit tray. It should also contain all the wires that the printer uses to connect to your PC. These are a 6 foot PC cord, a 6 foot USB cord, an AC power cord, and a telephone cord. Of course, included is, also, a printer cartridge.
For anyone worrying about a tiresome installation process, do not worry the WorkCentre 390 is extremely simple. The printer has two guides that lay out the entire installation process and give information about each main feature. So, anyone new to setting up a printer should not worry.
The WorkCentre 390 toner comes with the printer. The first cartridge is included and has an easy installation process. First open the cartridge and shake it up to make sure the toner is evenly spread. Next, there is a piece of sealing tape that needs to be removed from the cartridge before it can be used. After removing the sealing tape, hold the grasp and place it in the printer. It should click into place. After the toner is in place, all that is left to close the lid and you are done.
When you run out of WorkCentre 390 toner, it is easily found at many places including the internet. Online you can find toner for as cheap as $8. The genuine Xerox brand toner for the WorkCentre 390 can be as expensive as $98.
The WorkCentre 390 printer is a convenient printer that has many functions. Phaser Compatible Toner can be used in your home or office. It can be connected to your PC for easy transfers. The installation process is the furthest thing from complicated. The Phaser 6100 Toner Cartridge is easy to install in the printer, and easy to find when you run out. For more information, check out our site http://www.qtoner.us.
- Phaser 6100 Printer Toner is Good for Any Home or Business The WorkCentre 390 is a small all in one printer...
- Simplicity Is the Phaser 6100 Printer Cartridge The WorkCentre 390 is a small all in one printer...
- HP C7115A Toner – The Master Home Business Printer Toner Cartridge With versatility and workability that is truly comprehensive, Hewlett Packard...
- Canon ImageClass MF4690 Toner Cartridge – The Suited Home Business Printer Finding the perfect printer for your home or office is...
- Xerox Phaser 7300 Printer Toner Cartridge – The Office Is Sure To Adore This Great Printer And Printer Toner Cartridge Combination The Xerox Phaser 7300 printer offers encompassing flexibility and functionality....